– Safe and environment-friendly, with applying the preparation of no CFC and HCFC and flammable
– No residue during instant evaporation, material surface is still clean after evaporation, without side effects on current property
– For most metals, plastic is non-corrosive, it will not wear or scratch the surface of the material
– With accurate spray nozzle and extended tube as well as gun-way pressing trigger, it will make easier and more accurate
– Test low temperature
– Available to be used for preventing the sprayed refrigerant liquid which will frostbite when welding the parts with thermal sensitivity
– Metal pipe connecting and removal, bearing assembly and removal
– Clear chewing gum.Operation Steps
– Shake up sufficiently before use and during use.
– Please don,t spray toward your skin, the sprayed refrigerant liquid will frostbite the bare skin, please use a protective face shield, eyeglasses, long skirt, gloves, etc.
– Any operation near fire is forbidden
– Spray evenly with a targeted distance from the spray nozzle is 15-30 cm, press the spraying trigger, to keep spraying
– The extended tube can be used in case of accurate spraying
Notice1. This product contains pressure gas. please keep it away from heat source and fire, do not pierce, knock or fire the gas spray pot.
2. Please store it out of children.
3. Do not spray on the skin. the can will dispense freezing liquid which can frostbite exposed skin.
4. This product contains a slight smell irritant for skin and eyes, in case of spattering into the eyes, please flush with loss of water immediately, and go to the hospital if necessary in case of contacting the skin, please flush with soap and much clean water.